Network Guidelines
Installation and networking requirements.
Ouva on-site network requires the following for Ouva devices, servers, and PCs:
- Fixed IP address for server or a DHCP response with proper DNS record.
- A working Network Time Protocol (NTP) server should be reachable from all devices.
- A separate VLAN is ideal but is not a hard requirement.
- We can run Care Automation with a subdomain (<company>.ouva.dev) and SSL certificate on our domain name. This requires a fixed IP address.
- You can specify a domain and share the relevant SSL certificate with us.
- In both cases the domain name must be queryable from an appropriate DNS server.
All Ouva software and required third-party packages are hosted with Nexus on AWS server. When setting up the Operating System, updating application software, the end-device pulls the latest binaries from these servers.
- Docker registry: 80,443/TCP
- CI/CD tools: 443,50000/TCP
- Rocky Linux package repositories: 80, 443/TCP
Device diagnostic data (e.g. CPU temperature, memory utilization) is sent to Ouva-hosted server (on AWS) which processes data using Zabbix software. If there is anything out of ordinary, it automatically pings Ouva maintenance staff. (Optional)
- Zabbix: 10050, 10051/TCP
Remote support is a critical part of Ouva’s ongoing service delivery. By default, systems are set up to be controlled using AnyDesk software using the following ports:
- AnyDesk: 80,443, 6568/TCP
If your facility uses a separate vendor remote access solution, such as SecureLink or Citrix, Ouva team can carry out remote operations using those.
Last modified 1yr ago